205/60R16 vs 245/40R18
245/40R18 has an overall diameter of 653.2 mm (25.72") compared with 652.4 mm (25.69") for 205/60R16, a difference of +0.8 mm (+0.12 %). The sidewall changes by -25.0 mm, section width by +40 mm and ride height by +0.4 mm. Using the ETRTO rolling circumference, 205/60R16 turns 503 times per kilometre and 245/40R18 turns 502 times. With 245/40R18 fitted to a car calibrated for 205/60R16, an indicated 100 km/h is a true 100.1 km/h, and the odometer records 99.9 km for every 100 km driven. This is within the commonly quoted 3 % tolerance.
Full comparison
| Measurement | 205/60R16 | 245/40R18 | Difference |
|---|---|---|---|
| Section width | 205 mm | 245 mm | +40 mm |
| Sidewall height | 123.0 mm | 98.0 mm | -25.0 mm |
| Rim diameter | 16" | 18" | +2.0" |
| Overall diameter | 652.4 mm (25.69") | 653.2 mm (25.72") | +0.8 mm (+0.12 %) |
| Static circumference | 2050 mm | 2052 mm | +3 mm |
| Rolling circumference (ETRTO) | 1990 mm | 1992 mm | +2 mm |
| Revs per km | 503 | 502 | -1 |
| Ride height | +0.4 mm | ||
| Inch equivalent | 25.7×8.1R16 | 25.7×9.6R18 | |
| Approved rim widths (approx.) | 5.5″–7″ | 8″–9.5″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 40.0 | 50.1 | 60.1 | 80.1 | 100.1 | 110.1 |
| Error (km/h) | +0.0 | +0.1 | +0.1 | +0.1 | +0.1 | +0.1 |
Assumes the speedo was accurate on 205/60R16. Odometer records 99.9 km for every 100 km actually driven.
- The 245/40R18 is 0.8 mm (0.12 %) larger in diameter, so your speedo will read low and your odometer will under-record distance.
- Section width changes by +40 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
- Rim diameter changes from 16" to 18", so new wheels are required.
Is 245/40R18 legal in Australia? Within limits, verify speedo
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of +0.8 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A larger tyre makes the speedo read lower: at an indicated 100 km/h you would be doing 100.1 km/h. ADR 18 requires the speedo never to read below true speed, but factory speedos typically over-read by 2-6 %, so a 0.1 % increase is usually absorbed. Verify with a GPS speed app after fitting. | Verify |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 245/40R18 instead of 205/60R16?
Overall diameter changes by +0.8 mm (+0.12 %). That is within the usual 3 % rule of thumb, so it is generally an acceptable swap provided the load index and speed rating meet your tyre placard and the tyre suits your rim width. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 245/40R18?
Your speedo will read low by about 0.12 %. At an indicated 100 km/h you would actually be travelling 100.1 km/h, and at 110 km/h about 110.1 km/h.
What is the rolling circumference of 245/40R18?
Static circumference is 2052 mm; the ETRTO rolling circumference under load is about 1992 mm, which is 502 revolutions per kilometre.
245/40R18 in inches
245/40R18 is approximately 25.7×9.6R18: 25.7" tall, 9.6" wide, on a 18" rim, with a 3.9" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.