215/60R16 vs 225/55R17
225/55R17 has an overall diameter of 679.3 mm (26.74") compared with 664.4 mm (26.16") for 215/60R16, a difference of +14.9 mm (+2.24 %). The sidewall changes by -5.2 mm, section width by +10 mm and ride height by +7.4 mm. Using the ETRTO rolling circumference, 215/60R16 turns 493 times per kilometre and 225/55R17 turns 483 times. With 225/55R17 fitted to a car calibrated for 215/60R16, an indicated 100 km/h is a true 102.2 km/h, and the odometer records 97.8 km for every 100 km driven. This is close to the commonly quoted 3 % tolerance, so check clearance and local rules.
Full comparison
| Measurement | 215/60R16 | 225/55R17 | Difference |
|---|---|---|---|
| Section width | 215 mm | 225 mm | +10 mm |
| Sidewall height | 129.0 mm | 123.8 mm | -5.2 mm |
| Rim diameter | 16" | 17" | +1.0" |
| Overall diameter | 664.4 mm (26.16") | 679.3 mm (26.74") | +14.9 mm (+2.24 %) |
| Static circumference | 2087 mm | 2134 mm | +47 mm |
| Rolling circumference (ETRTO) | 2026 mm | 2072 mm | +45 mm |
| Revs per km | 493 | 483 | -11 |
| Ride height | +7.4 mm | ||
| Inch equivalent | 26.2×8.5R16 | 26.7×8.9R17 | |
| Approved rim widths (approx.) | 6″–7.5″ | 6″–8″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 40.9 | 51.1 | 61.3 | 81.8 | 102.2 | 112.5 |
| Error (km/h) | +0.9 | +1.1 | +1.3 | +1.8 | +2.2 | +2.5 |
Assumes the speedo was accurate on 215/60R16. Odometer records 97.8 km for every 100 km actually driven.
- The 225/55R17 is 14.9 mm (2.24 %) larger in diameter, so your speedo will read low and your odometer will under-record distance.
- Section width changes by +10 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
- Rim diameter changes from 16" to 17", so new wheels are required.
Is 225/55R17 legal in Australia? Within limits, verify speedo
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of +14.9 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A larger tyre makes the speedo read lower: at an indicated 100 km/h you would be doing 102.2 km/h. ADR 18 requires the speedo never to read below true speed, but factory speedos typically over-read by 2-6 %, so a 2.2 % increase is usually absorbed. Verify with a GPS speed app after fitting. | Verify |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 225/55R17 instead of 215/60R16?
Overall diameter changes by +14.9 mm (+2.24 %). That is close to the 3 % rule of thumb; it may fit, but check guard, strut and brake clearance and your local rules. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 225/55R17?
Your speedo will read low by about 2.24 %. At an indicated 100 km/h you would actually be travelling 102.2 km/h, and at 110 km/h about 112.5 km/h.
What is the rolling circumference of 225/55R17?
Static circumference is 2134 mm; the ETRTO rolling circumference under load is about 2072 mm, which is 483 revolutions per kilometre.
225/55R17 in inches
225/55R17 is approximately 26.7×8.9R17: 26.7" tall, 8.9" wide, on a 17" rim, with a 4.9" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.