225/35R19 vs 245/35R19
245/35R19 has an overall diameter of 654.1 mm (25.75") compared with 640.1 mm (25.20") for 225/35R19, a difference of +14.0 mm (+2.19 %). The sidewall changes by +7.0 mm, section width by +20 mm and ride height by +7.0 mm. Using the ETRTO rolling circumference, 225/35R19 turns 512 times per kilometre and 245/35R19 turns 501 times. With 245/35R19 fitted to a car calibrated for 225/35R19, an indicated 100 km/h is a true 102.2 km/h, and the odometer records 97.9 km for every 100 km driven. This is close to the commonly quoted 3 % tolerance, so check clearance and local rules.
Full comparison
| Measurement | 225/35R19 | 245/35R19 | Difference |
|---|---|---|---|
| Section width | 225 mm | 245 mm | +20 mm |
| Sidewall height | 78.8 mm | 85.8 mm | +7.0 mm |
| Rim diameter | 19" | 19" | 0.0" |
| Overall diameter | 640.1 mm (25.20") | 654.1 mm (25.75") | +14.0 mm (+2.19 %) |
| Static circumference | 2011 mm | 2055 mm | +44 mm |
| Rolling circumference (ETRTO) | 1952 mm | 1995 mm | +43 mm |
| Revs per km | 512 | 501 | -11 |
| Ride height | +7.0 mm | ||
| Inch equivalent | 25.2×8.9R19 | 25.8×9.6R19 | |
| Approved rim widths (approx.) | 7.5″–9″ | 8″–9.5″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 40.9 | 51.1 | 61.3 | 81.7 | 102.2 | 112.4 |
| Error (km/h) | +0.9 | +1.1 | +1.3 | +1.7 | +2.2 | +2.4 |
Assumes the speedo was accurate on 225/35R19. Odometer records 97.9 km for every 100 km actually driven.
- The 245/35R19 is 14 mm (2.19 %) larger in diameter, so your speedo will read low and your odometer will under-record distance.
- Section width changes by +20 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
Is 245/35R19 legal in Australia? Within limits, verify speedo
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of +14.0 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A larger tyre makes the speedo read lower: at an indicated 100 km/h you would be doing 102.2 km/h. ADR 18 requires the speedo never to read below true speed, but factory speedos typically over-read by 2-6 %, so a 2.2 % increase is usually absorbed. Verify with a GPS speed app after fitting. | Verify |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 245/35R19 instead of 225/35R19?
Overall diameter changes by +14.0 mm (+2.19 %). That is close to the 3 % rule of thumb; it may fit, but check guard, strut and brake clearance and your local rules. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 245/35R19?
Your speedo will read low by about 2.19 %. At an indicated 100 km/h you would actually be travelling 102.2 km/h, and at 110 km/h about 112.4 km/h.
What is the rolling circumference of 245/35R19?
Static circumference is 2055 mm; the ETRTO rolling circumference under load is about 1995 mm, which is 501 revolutions per kilometre.
245/35R19 in inches
245/35R19 is approximately 25.8×9.6R19: 25.8" tall, 9.6" wide, on a 19" rim, with a 3.4" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.