225/45R17 vs 215/50R17
215/50R17 has an overall diameter of 646.8 mm (25.46") compared with 634.3 mm (24.97") for 225/45R17, a difference of +12.5 mm (+1.97 %). The sidewall changes by +6.3 mm, section width by -10 mm and ride height by +6.3 mm. Using the ETRTO rolling circumference, 225/45R17 turns 517 times per kilometre and 215/50R17 turns 507 times. With 215/50R17 fitted to a car calibrated for 225/45R17, an indicated 100 km/h is a true 102 km/h, and the odometer records 98.1 km for every 100 km driven. This is within the commonly quoted 3 % tolerance.
Full comparison
| Measurement | 225/45R17 | 215/50R17 | Difference |
|---|---|---|---|
| Section width | 225 mm | 215 mm | -10 mm |
| Sidewall height | 101.3 mm | 107.5 mm | +6.3 mm |
| Rim diameter | 17" | 17" | 0.0" |
| Overall diameter | 634.3 mm (24.97") | 646.8 mm (25.46") | +12.5 mm (+1.97 %) |
| Static circumference | 1993 mm | 2032 mm | +39 mm |
| Rolling circumference (ETRTO) | 1935 mm | 1973 mm | +38 mm |
| Revs per km | 517 | 507 | -10 |
| Ride height | +6.3 mm | ||
| Inch equivalent | 25×8.9R17 | 25.5×8.5R17 | |
| Approved rim widths (approx.) | 7″–8.5″ | 6″–8″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 40.8 | 51.0 | 61.2 | 81.6 | 102.0 | 112.2 |
| Error (km/h) | +0.8 | +1.0 | +1.2 | +1.6 | +2.0 | +2.2 |
Assumes the speedo was accurate on 225/45R17. Odometer records 98.1 km for every 100 km actually driven.
- The 215/50R17 is 12.5 mm (1.97 %) larger in diameter, so your speedo will read low and your odometer will under-record distance.
- Section width changes by -10 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
Is 215/50R17 legal in Australia? Within limits, verify speedo
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of +12.5 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A larger tyre makes the speedo read lower: at an indicated 100 km/h you would be doing 102.0 km/h. ADR 18 requires the speedo never to read below true speed, but factory speedos typically over-read by 2-6 %, so a 2.0 % increase is usually absorbed. Verify with a GPS speed app after fitting. | Verify |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 215/50R17 instead of 225/45R17?
Overall diameter changes by +12.5 mm (+1.97 %). That is within the usual 3 % rule of thumb, so it is generally an acceptable swap provided the load index and speed rating meet your tyre placard and the tyre suits your rim width. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 215/50R17?
Your speedo will read low by about 1.97 %. At an indicated 100 km/h you would actually be travelling 102 km/h, and at 110 km/h about 112.2 km/h.
What is the rolling circumference of 215/50R17?
Static circumference is 2032 mm; the ETRTO rolling circumference under load is about 1973 mm, which is 507 revolutions per kilometre.
215/50R17 in inches
215/50R17 is approximately 25.5×8.5R17: 25.5" tall, 8.5" wide, on a 17" rim, with a 4.2" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.