245/40R17 vs 265/35R18
265/35R18 has an overall diameter of 642.7 mm (25.30") compared with 627.8 mm (24.72") for 245/40R17, a difference of +14.9 mm (+2.37 %). The sidewall changes by -5.2 mm, section width by +20 mm and ride height by +7.5 mm. Using the ETRTO rolling circumference, 245/40R17 turns 522 times per kilometre and 265/35R18 turns 510 times. With 265/35R18 fitted to a car calibrated for 245/40R17, an indicated 100 km/h is a true 102.4 km/h, and the odometer records 97.7 km for every 100 km driven. This is close to the commonly quoted 3 % tolerance, so check clearance and local rules.
Full comparison
| Measurement | 245/40R17 | 265/35R18 | Difference |
|---|---|---|---|
| Section width | 245 mm | 265 mm | +20 mm |
| Sidewall height | 98.0 mm | 92.8 mm | -5.2 mm |
| Rim diameter | 17" | 18" | +1.0" |
| Overall diameter | 627.8 mm (24.72") | 642.7 mm (25.30") | +14.9 mm (+2.37 %) |
| Static circumference | 1972 mm | 2019 mm | +47 mm |
| Rolling circumference (ETRTO) | 1915 mm | 1960 mm | +45 mm |
| Revs per km | 522 | 510 | -12 |
| Ride height | +7.5 mm | ||
| Inch equivalent | 24.7×9.6R17 | 25.3×10.4R18 | |
| Approved rim widths (approx.) | 8″–9.5″ | 9″–10.5″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 40.9 | 51.2 | 61.4 | 81.9 | 102.4 | 112.6 |
| Error (km/h) | +0.9 | +1.2 | +1.4 | +1.9 | +2.4 | +2.6 |
Assumes the speedo was accurate on 245/40R17. Odometer records 97.7 km for every 100 km actually driven.
- The 265/35R18 is 14.9 mm (2.37 %) larger in diameter, so your speedo will read low and your odometer will under-record distance.
- Section width changes by +20 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
- Rim diameter changes from 17" to 18", so new wheels are required.
Is 265/35R18 legal in Australia? Within limits, verify speedo
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of +14.9 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A larger tyre makes the speedo read lower: at an indicated 100 km/h you would be doing 102.4 km/h. ADR 18 requires the speedo never to read below true speed, but factory speedos typically over-read by 2-6 %, so a 2.4 % increase is usually absorbed. Verify with a GPS speed app after fitting. | Verify |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 265/35R18 instead of 245/40R17?
Overall diameter changes by +14.9 mm (+2.37 %). That is close to the 3 % rule of thumb; it may fit, but check guard, strut and brake clearance and your local rules. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 265/35R18?
Your speedo will read low by about 2.37 %. At an indicated 100 km/h you would actually be travelling 102.4 km/h, and at 110 km/h about 112.6 km/h.
What is the rolling circumference of 265/35R18?
Static circumference is 2019 mm; the ETRTO rolling circumference under load is about 1960 mm, which is 510 revolutions per kilometre.
265/35R18 in inches
265/35R18 is approximately 25.3×10.4R18: 25.3" tall, 10.4" wide, on a 18" rim, with a 3.7" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.