265/35R18 vs 225/35R19
225/35R19 has an overall diameter of 640.1 mm (25.20") compared with 642.7 mm (25.30") for 265/35R18, a difference of -2.6 mm (-0.40 %). The sidewall changes by -14.0 mm, section width by -40 mm and ride height by -1.3 mm. Using the ETRTO rolling circumference, 265/35R18 turns 510 times per kilometre and 225/35R19 turns 512 times. With 225/35R19 fitted to a car calibrated for 265/35R18, an indicated 100 km/h is a true 99.6 km/h, and the odometer records 100.4 km for every 100 km driven. This is within the commonly quoted 3 % tolerance.
Full comparison
| Measurement | 265/35R18 | 225/35R19 | Difference |
|---|---|---|---|
| Section width | 265 mm | 225 mm | -40 mm |
| Sidewall height | 92.8 mm | 78.8 mm | -14.0 mm |
| Rim diameter | 18" | 19" | +1.0" |
| Overall diameter | 642.7 mm (25.30") | 640.1 mm (25.20") | -2.6 mm (-0.40 %) |
| Static circumference | 2019 mm | 2011 mm | -8 mm |
| Rolling circumference (ETRTO) | 1960 mm | 1952 mm | -8 mm |
| Revs per km | 510 | 512 | +2 |
| Ride height | -1.3 mm | ||
| Inch equivalent | 25.3×10.4R18 | 25.2×8.9R19 | |
| Approved rim widths (approx.) | 9″–10.5″ | 7.5″–9″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 39.8 | 49.8 | 59.8 | 79.7 | 99.6 | 109.6 |
| Error (km/h) | -0.2 | -0.2 | -0.2 | -0.3 | -0.4 | -0.4 |
Assumes the speedo was accurate on 265/35R18. Odometer records 100.4 km for every 100 km actually driven.
- The 225/35R19 is 2.6 mm (0.4 %) smaller in diameter, so your speedo will read high and your odometer will over-record distance.
- Section width changes by -40 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
- Rim diameter changes from 18" to 19", so new wheels are required.
Is 225/35R19 legal in Australia? More info needed
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of -2.6 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A smaller tyre makes the speedo read high: at an indicated 100 km/h you would be doing 99.6 km/h (over-read 0.4 km/h; ADR 18 allows up to 14.0 km/h at that speed). | OK |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 225/35R19 instead of 265/35R18?
Overall diameter changes by -2.6 mm (-0.40 %). That is within the usual 3 % rule of thumb, so it is generally an acceptable swap provided the load index and speed rating meet your tyre placard and the tyre suits your rim width. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 225/35R19?
Your speedo will read high by about 0.40 %. At an indicated 100 km/h you would actually be travelling 99.6 km/h, and at 110 km/h about 109.6 km/h.
What is the rolling circumference of 225/35R19?
Static circumference is 2011 mm; the ETRTO rolling circumference under load is about 1952 mm, which is 512 revolutions per kilometre.
225/35R19 in inches
225/35R19 is approximately 25.2×8.9R19: 25.2" tall, 8.9" wide, on a 19" rim, with a 3.1" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.