265/70R16 vs 255/70R16
255/70R16 has an overall diameter of 763.4 mm (30.06") compared with 777.4 mm (30.61") for 265/70R16, a difference of -14.0 mm (-1.80 %). The sidewall changes by -7.0 mm, section width by -10 mm and ride height by -7.0 mm. Using the ETRTO rolling circumference, 265/70R16 turns 422 times per kilometre and 255/70R16 turns 429 times. With 255/70R16 fitted to a car calibrated for 265/70R16, an indicated 100 km/h is a true 98.2 km/h, and the odometer records 101.8 km for every 100 km driven. This is within the commonly quoted 3 % tolerance.
Full comparison
| Measurement | 265/70R16 | 255/70R16 | Difference |
|---|---|---|---|
| Section width | 265 mm | 255 mm | -10 mm |
| Sidewall height | 185.5 mm | 178.5 mm | -7.0 mm |
| Rim diameter | 16" | 16" | 0.0" |
| Overall diameter | 777.4 mm (30.61") | 763.4 mm (30.06") | -14.0 mm (-1.80 %) |
| Static circumference | 2442 mm | 2398 mm | -44 mm |
| Rolling circumference (ETRTO) | 2371 mm | 2328 mm | -43 mm |
| Revs per km | 422 | 429 | +8 |
| Ride height | -7.0 mm | ||
| Inch equivalent | 30.6×10.4R16 | 30.1x10R16 | |
| Approved rim widths (approx.) | 7.5″–9″ | 7″–8.5″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 39.3 | 49.1 | 58.9 | 78.6 | 98.2 | 108.0 |
| Error (km/h) | -0.7 | -0.9 | -1.1 | -1.4 | -1.8 | -2.0 |
Assumes the speedo was accurate on 265/70R16. Odometer records 101.8 km for every 100 km actually driven.
- The 255/70R16 is 14 mm (1.8 %) smaller in diameter, so your speedo will read high and your odometer will over-record distance.
- Section width changes by -10 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
Is 255/70R16 legal in Australia? More info needed
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of -14.0 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A smaller tyre makes the speedo read high: at an indicated 100 km/h you would be doing 98.2 km/h (over-read 1.8 km/h; ADR 18 allows up to 13.8 km/h at that speed). | OK |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 255/70R16 instead of 265/70R16?
Overall diameter changes by -14.0 mm (-1.80 %). That is within the usual 3 % rule of thumb, so it is generally an acceptable swap provided the load index and speed rating meet your tyre placard and the tyre suits your rim width. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 255/70R16?
Your speedo will read high by about 1.80 %. At an indicated 100 km/h you would actually be travelling 98.2 km/h, and at 110 km/h about 108 km/h.
What is the rolling circumference of 255/70R16?
Static circumference is 2398 mm; the ETRTO rolling circumference under load is about 2328 mm, which is 429 revolutions per kilometre.
255/70R16 in inches
255/70R16 is approximately 30.1x10R16: 30.1" tall, 10.0" wide, on a 16" rim, with a 7.0" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.