31×10.5R15 vs 265/75R16
265/75R16 has an overall diameter of 803.9 mm (31.65") compared with 787.4 mm (31.00") for 31×10.5R15, a difference of +16.5 mm (+2.10 %). The sidewall changes by -4.4 mm, section width by -2 mm and ride height by +8.3 mm. Using the ETRTO rolling circumference, 31×10.5R15 turns 416 times per kilometre and 265/75R16 turns 408 times. With 265/75R16 fitted to a car calibrated for 31×10.5R15, an indicated 100 km/h is a true 102.1 km/h, and the odometer records 97.9 km for every 100 km driven. This is close to the commonly quoted 3 % tolerance, so check clearance and local rules.
Full comparison
| Measurement | 31×10.5R15 | 265/75R16 | Difference |
|---|---|---|---|
| Section width | 267 mm | 265 mm | -2 mm |
| Sidewall height | 203.2 mm | 198.8 mm | -4.4 mm |
| Rim diameter | 15" | 16" | +1.0" |
| Overall diameter | 787.4 mm (31.00") | 803.9 mm (31.65") | +16.5 mm (+2.10 %) |
| Static circumference | 2474 mm | 2526 mm | +52 mm |
| Rolling circumference (ETRTO) | 2402 mm | 2452 mm | +50 mm |
| Revs per km | 416 | 408 | -9 |
| Ride height | +8.3 mm | ||
| Inch equivalent | 31×10.5R15 | 31.6×10.4R16 | |
| Approved rim widths (approx.) | 7″–8.5″ | 7″–8.5″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 40.8 | 51.0 | 61.3 | 81.7 | 102.1 | 112.3 |
| Error (km/h) | +0.8 | +1.0 | +1.3 | +1.7 | +2.1 | +2.3 |
Assumes the speedo was accurate on 31×10.5R15. Odometer records 97.9 km for every 100 km actually driven.
- The 265/75R16 is 16.5 mm (2.1 %) larger in diameter, so your speedo will read low and your odometer will under-record distance.
- Section width changes by -2 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
- Rim diameter changes from 15" to 16", so new wheels are required.
Is 265/75R16 legal in Australia? Needs certification
| Overall diameter (VSB 14 LS 4.2.4) 265/75R16 is 16.5 mm larger than 31×10.5R15; the limit without certification for a passenger car (MA/MB) is +15 mm. Larger increases need an approved signatory / engineering certificate (modification code LS or state equivalent) and may not be permitted at all. | Cert. |
| Speedometer (ADR 18/03) A larger tyre makes the speedo read lower: at an indicated 100 km/h you would be doing 102.1 km/h. ADR 18 requires the speedo never to read below true speed, but factory speedos typically over-read by 2-6 %, so a 2.1 % increase is usually absorbed. Verify with a GPS speed app after fitting. | Verify |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 265/75R16 instead of 31×10.5R15?
Overall diameter changes by +16.5 mm (+2.10 %). That is close to the 3 % rule of thumb; it may fit, but check guard, strut and brake clearance and your local rules. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 265/75R16?
Your speedo will read low by about 2.10 %. At an indicated 100 km/h you would actually be travelling 102.1 km/h, and at 110 km/h about 112.3 km/h.
What is the rolling circumference of 265/75R16?
Static circumference is 2526 mm; the ETRTO rolling circumference under load is about 2452 mm, which is 408 revolutions per kilometre.
265/75R16 in inches
265/75R16 is approximately 31.6×10.4R16: 31.6" tall, 10.4" wide, on a 16" rim, with a 7.8" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.