285/50R20 vs 295/40R21
295/40R21 has an overall diameter of 769.4 mm (30.29") compared with 793.0 mm (31.22") for 285/50R20, a difference of -23.6 mm (-2.98 %). The sidewall changes by -24.5 mm, section width by +10 mm and ride height by -11.8 mm. Using the ETRTO rolling circumference, 285/50R20 turns 413 times per kilometre and 295/40R21 turns 426 times. With 295/40R21 fitted to a car calibrated for 285/50R20, an indicated 100 km/h is a true 97 km/h, and the odometer records 103.1 km for every 100 km driven. This is close to the commonly quoted 3 % tolerance, so check clearance and local rules.
Full comparison
| Measurement | 285/50R20 | 295/40R21 | Difference |
|---|---|---|---|
| Section width | 285 mm | 295 mm | +10 mm |
| Sidewall height | 142.5 mm | 118.0 mm | -24.5 mm |
| Rim diameter | 20" | 21" | +1.0" |
| Overall diameter | 793.0 mm (31.22") | 769.4 mm (30.29") | -23.6 mm (-2.98 %) |
| Static circumference | 2491 mm | 2417 mm | -74 mm |
| Rolling circumference (ETRTO) | 2419 mm | 2347 mm | -72 mm |
| Revs per km | 413 | 426 | +13 |
| Ride height | -11.8 mm | ||
| Inch equivalent | 31.2×11.2R20 | 30.3×11.6R21 | |
| Approved rim widths (approx.) | 8″–10″ | 10″–11.5″ |
Speedometer error
| Speedo reads | 40 | 50 | 60 | 80 | 100 | 110 |
|---|---|---|---|---|---|---|
| Actual speed (km/h) | 38.8 | 48.5 | 58.2 | 77.6 | 97.0 | 106.7 |
| Error (km/h) | -1.2 | -1.5 | -1.8 | -2.4 | -3.0 | -3.3 |
Assumes the speedo was accurate on 285/50R20. Odometer records 103.1 km for every 100 km actually driven.
- The 295/40R21 is 23.6 mm (2.98 %) smaller in diameter, so your speedo will read high and your odometer will over-record distance.
- Section width changes by +10 mm. Check guard, strut and inner-arch clearance and that the rim width is within the approved range for the new tyre.
- Rim diameter changes from 20" to 21", so new wheels are required.
Is 295/40R21 legal in Australia? More info needed
| Overall diameter (VSB 14 LS 4.2.4) Diameter change of -23.6 mm is within the +15 mm / -26 mm allowance for a passenger car (MA/MB) (measured against the largest size the manufacturer designates for the model). | OK |
| Speedometer (ADR 18/03) A smaller tyre makes the speedo read high: at an indicated 100 km/h you would be doing 97.0 km/h (over-read 3.0 km/h; ADR 18 allows up to 13.7 km/h at that speed). | OK |
| Load index (tyre placard / ADR 42) Enter the placard load index and the replacement tyre load index to check. | ? |
| Speed rating (tyre placard / ADR 42) Enter the placard speed rating and the replacement tyre speed rating to check. | ? |
Frequently asked
Can I fit 295/40R21 instead of 285/50R20?
Overall diameter changes by -23.6 mm (-2.98 %). That is close to the 3 % rule of thumb; it may fit, but check guard, strut and brake clearance and your local rules. In Australia VSB 14 allows up to +15 mm for passenger cars and +50 mm for 4WDs/goods vehicles without certification.
How much will my speedo be out with 295/40R21?
Your speedo will read high by about 2.98 %. At an indicated 100 km/h you would actually be travelling 97 km/h, and at 110 km/h about 106.7 km/h.
What is the rolling circumference of 295/40R21?
Static circumference is 2417 mm; the ETRTO rolling circumference under load is about 2347 mm, which is 426 revolutions per kilometre.
295/40R21 in inches
295/40R21 is approximately 30.3×11.6R21: 30.3" tall, 11.6" wide, on a 21" rim, with a 4.6" sidewall.
Buying tyres for your business?
Onyx Tyres supplies workshops, retailers and fleets across Australia at wholesale prices. Open a trade account to see stock and pricing and order online.